July 6, 2010
But the relief wells are not a slam dunk.
CBS News states:
“It’s not a solid dunk,” said Eric Smith, a deepwater drilling expert. “It’s going to take some work.”
Smith said two things could go wrong. The cut could miss the broken wellbore, and BP would just try again, or engineers could drill into hidden gas pockets.
“When you are drilling into that you have to be careful of a kick, a blowout in the relief well,” Smith said.
George Hirasaki, a Rice University professor in chemical and biomolecular engineering who was involved in the Bay Marchand oil containment effort for Shell, said engineers have to be very careful when drilling into any formation that has hydrocarbons, which poses the risk of the same type of explosion that destroyed the rig.
Recently-retired Shell Oil President John Hofmeister said that the well casing below the sea floor may have been compromised, which could render success from the relief wells less certain:
[Question] What are the chances that the well casing below the sea floor has been compromised, and that gas and oil are coming up the outside of the well casing, eroding the surrounding soft rock. Could this lead to a catastrophic geological failure, unstoppable even by the relief wells?
John Hofmeister: This is what some people fear has occurred. It is also why the “top kill” process was halted. If the casing is compromised the well is that much more difficult to shut down, including the risk that the relief wells may not be enough. If the relief wells do not result in stopping the flow, the next and drastic step is to implode the well on top of itself, which carries other risks as well.
Hofmeister subsequently told MSNBC:
The question is whether there is enough mechanical structure left at the base of the reservoir to hold the cement when they start pouring cement in [from the relief well].
The more oil we some coming out, the more it tells you that the whole casing system is deteriorating. The fact that more oil would be coming out rather than less oil, would suggest that the construction within the pipe is offering no resistance whatsoever, and we’re just getting a gusher.
Yesterday, the Guardian quoted the government official in charge of oil spill response as warning:
“There is a chance – a slight chance – they could nick the wellbore,” Thad Allen, the coast guard commander, said. …
A nick risks starting a new small leak or possibly even a collapse of a section of the pipe given that it was damaged in the explosion in ways still not fully understood.
The intercept could be complicated if it turns out that the oil is flowing around the pipe, between the pipe and the cement of the well bore.
And Spiegel previously reported that there are many dangers with completing the relief wells:
Independent experts warn that relief wells, like any well, are not without risk. “More oil could leak than before, because the field is being drilled into again,” says Fred Aminzadeh, a geophysicist at the University of Southern California. Ira Leifer, a geochemist at the University of California in Santa Barbara, voices similar concerns: “In the worst case, we would suddenly be dealing with two spills, and we’d have twice the problem.”
As straightforward as it sounds, this approach [i.e. killing a spill by drilling relief wells] has not always been easy to implement in the past. The disaster in the Timor Sea, for example, ended in a debacle. It took engineer five tries to even find the borehole under the sea floor. Shortly before the end, the West Atlas oilrig went up in flames, after all.
[David Rensink, incoming president of the American Association of Petroleum Geologists] is particularly concerned that BP, in drilling the relief wells, will penetrate into precisely those rock formations in which extreme pressure and temperature conditions facilitated the April blowout in the first place. Gas bubbles and gushing oil from the depths are real possibilities. “Any relief or kill well needs to be drilled with more caution than the first well,” Donal Van Nieuwenhuise, a geologist at the University of Houston, told the New Orleans daily Times-Picayune. “You don’t want a repeat performance.
An oil industry geologist adds:
[There are] lots of potential complications [in drilling relief wells]. A big one would be using too high a mud weight/pump pressure and fracturing thwe rock around the [relief well] and losing it. Also instead of the mud building a tall colume inside the well bore and stoping the flow it might escape out of ruptured [casing] or failed [cement] shoes. Then they might not ever be able to build enough back pressure to stop the flow. I suspect many of these possible problems won’t reveal themselves until the actual kill process begins.
As CBS notes, even BP is no longer expressing full confidence:
BP leaders have showed supreme confidence in their relief wells.
“I fully expect that the well itself will be shut off in August,” said Bob Dudley, BP’s point man on the spill.
But recently? More caution.
“The drilling of relief wells, there’s nothing guaranteed,” Dudley said.
Indeed, the veteran engineer in charge of the Ixtoc Gulf oil well disaster in the 1970’s states that – given the pressures involved – a single relief well might not be enough:
Carlos Osornio, a Mexican engineer in charge of Pemex’s deepwater drilling operations during the Ixtoc crisis, said BP may ultimately find that both relief wells are needed to contain the gusher.
“One relief well may not be enough to contain the high volume (of oil flow), but two will work for sure,” he said.
Similarly, former Secretary of Labor Robert Reich previously noted:
A petroleum engineer who’s worked in the oil industry tells me [that] a recent blow-out off the coast of Australia required five pressure relief wells to successfully shut it down.
For the above reasons – and given BP’s track record of incompetence – I am hopeful, but not 100% confident that BP’s relief wells will succeed.
Indeed, even now – in the midst of the worst oil spill in history – BP is still trying to cut costs instead of doing everything it can to stop the oil gusher as soon as humanly possible. As the Guardian notes:
The search for the Macondo would go faster if BP were using measurement while drilling tools, whereby sensors installed in the drill string send the appropriate readings back to the surface, said Langlinais. However, that equipment is hugely expensive. Instead, BP is relying on a process that involves swapping the drill bit for the line carrying the sensor.
This article was posted: Tuesday, July 6, 2010 at 2:56 am